MK Products CobraTig 150 SM, Руководство пользователя

Страница: 15 / 29

CobraTig
®
150 Owner's Manual - Page 8
of the scale. Also, there is a change in the sound once the bottom of
the scale has been reached. The sound changes from a single beep
to a triple beep.
Section 8 Weld Orbital
From the MAIN MENU screen press this button to select orbital welding.
Once at the WELD ORBITAL screen, use the RECALL PROGRAM button
at the bottom of the screen to select from the library of customer designed
and saved procedures, or return to the MAIN MENU and use the APG (Auto
Procedure Generation) function in order to design a new weld procedure.
Use the SCROLL UP, SCROLL DOWN, ADJUST UP, and ADJUST DOWN
buttons to select and modify specific weld procedure parameters. Then
when all variables are set, press the START/STOP button to initiate the
welding process.
Once at the WELD ORBITAL screen, the last orbital weld procedure is
displayed from memory. This is the default procedure and ready to weld. If a
different weld procedure is desired, it can either be recalled from memory or,
developed using the Auto Program Generator (APG).
Start/Stop
Pressing this button will start the prepurge gas flowing and start the
welding procedure.
Main Menu
Press this button to return to the MAIN MENU.
Print Weld
Press the PRINT WELD button to obtain a printout of the last weld
procedure parameters and the wave form strip chart of the completed
weld.
This will give a weld procedure printout, first showing the description of
the procedure, followed by the all the welding parameters, then by Limit
and Deviation parameters, then by the actual strip chart of the weld
current, arc voltage and motor speed.
Scroll Up
Press this button in order to scroll and select the highlighted field from
one DEMAND parameter up to the next.
Adjust Up
After the SCROLL UP or SCROLL DOWN buttons have been used
to select a parameter to be modified, press the ADJUST UP button to
increase the numerical value of that parameter.
As this button is pressed for each parameter a vertical bar graph shows
the increasing value, both numerically and in height of the bar graph.
For most parameters, a maximum value is obtained once the vertical bar
graph has reached the top of the scale. There is also a change in the
sound once the maximum has been reached, from a single ‘beep’ to a
triple ‘beep’.