22
MK-Scarifier aSSeMBLY
(J)
Grasp the Cutting Drum
as shown.
(K)
Push the Cutting Drum away
from the belt side to loosen
the Shaft.
(L)
Place a rod in the hole on the
end of the Shaft, and while
holding the Cutting Drum,
remove the Shaft.
(M)
Remove the Cutting Drum
and Shaft.
NOTe:
Assembly is opposite of disassembly
cUTTiNg DrUM DiSaSSeMBLY
(A)
Rotate the Cutting Drum onto either
end and locate the Retaining Ring,
Retaining Screws.
(B)
Remove the 3 Retaining
Screws using a 7/16-inch
wrench.
(C)
Remove the Drum Retaining
Ring.
The Cutting Drum may be disassembled from either end.
NOTe:
(D)
If present, remove the three
Flat Washer Spacers.
(E)
Place the Retaining Ring and Flat
Washer Spacers in a secure location.
