Mizuho MOT-VS700 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 83

background image

1

1

Introductio

n

1

. Introduction

1.1 This manual

This manual contains information for safely and effectively using this product.
Before operating this product, read this manual thoroughly to understand how to operate and inspect the product.
Failure to follow these instructions could lead to serious injury.

The safety information is categorized as per the following so that the contents of warnings and cautions, and
the details of warnings and cautions which are labeled on the product may be comprehended.

WARNING

If this indication is ignored and the product is incorrectly used, serious injury or
death may result.

CAUTION

If this indication is ignored and the product is incorrectly used, serious injury and/or
damage to property may result.

NOTE

This notice notes additional information on the product’s functions.

The warning and caution notices on this manual relating to operating and inspecting, apply to the intended
use (surgical operations) of this product.
If the product is used for purposes other than surgery, the user is responsible in regard to safety for
performing operations and inspections which are not contained in this manual.

1.2 Intended use and this product

Operating table

This product is an operating table on which a patient is placed for surgical operations.
The product is intended to support a patient during surgical operations.
In conforming with the objectives of surgery, the product is equipped with features for adjusting its height,
and for freely changing and setting the patient’s body position.
The product uses both medical grade outlets and batteries as power sources.
In the operating room, have physicians, nurses and medical device technicians who are acquainted with the
usage of this product use it.

Touch panel

This product is provided with a touch panel. The touch panel displays a status of the operating table and its
error status. For the details of the touch panel, refer to Page 15.

«
...
3
4
5
6
7
...
»

Содержание MOT-VS700 Series




















































































Отзывы:

Нет отзывов

Похожие инструкции для MOT-VS700 Series

Бренд: GE Страницы: 43

Бренд: GE Страницы: 37

Бренд: GE Страницы: 210

Бренд: GE Страницы: 160

Бренд: GE Страницы: 146

Бренд: GE Страницы: 6

Бренд: GE Страницы: 27

Бренд: GE Страницы: 4

Бренд: Nemco Страницы: 13

Бренд: Ecco Страницы: 12

Бренд: UMF Medical Страницы: 12

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренд: Bacharach Страницы: 2

Бренд: Pari Страницы: 50

Бренд: Icare Страницы: 42

Бренд: IDEAL Networks Страницы: 10

Бренд: Nemalux Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды