Page 25
SECTION II OPERATION
To move the table top toward the foot end, press the
SLIDE FOOT button. From center position, the top
will slide up to 335 mm. Slide function will stop and
RETURN CTR Indicator will illuminate when table is
centered.
NOTE
If the back section is positioned below
horizontal, the top will not slide toward
the foot end beyond center. An audible
alarm will sound.
SLIDE HEAD
SLIDE FOOT
335 mm
245 mm
Figure 2-11. Top Slide
g. Leg Section
To lower the leg section, press the
LEG DOWN button (figure 2-12). The leg section will
go down to 100° below horizontal. To raise the leg
section, press the LEG UP button. The leg section
will go up to 15° above horizontal.
CAUTION
The Leg section may hit the table base
or the floor if both the leg and elevation
systems are placed in their full down
position.
NOTE
If the top is slid toward the head end
less than 195 mm from center, the leg
section will only go down 45°. An audi-
ble alarm will sound. If the top is slid
toward the head end more than 195
mm from center, the leg section will not
go below horizontal.
LEG UP
LEG DOWN
100°
15°
Figure 2-12. Leg Section Positioning
h. Flex Positioning
To place the table top in a
flex position from horizontal, press the FLEX button
(figure 2-13).To return the table top to a horizontal
position or into a reflex position, press the LEVEL or
REFLEX button.
NOTE
If the top is slid toward the foot end, the
FLEX function will not operate. An au-
dible alarm will sound.
FLEX
REFLEX
Figure 2-13. Flex/Reflex Positioning
