Miyachi Amada ISQ20 Series, Руководство по эксплуатации

Страница: 28 / 63

ISQ20
Connections
76609605EN-ISQ20-V1.2.docx 28/63
Pin I/O Function Note
X2.15
O15 Valve 1
See
also
chap.
5.3
+24 V DC
switched;
100 mA at 24 V
See also connector X4.1.
function depends on control mode
X2.16
O16 Valve 2
X2.17
O17 Valve 3
X2.18
O18 Valve 4
X2.19
O19 Valve 5
X2.20
O20 Out of limits tw, I,
U, P Kopf 1 100 mA at 24 V
X2.21
O21 Out of limits tw, I,
U, P Kopf 2 100 mA at 24 V
X2.22
O22 Part detection
evaluation head 1
100 mA at 24 V Output from start squeeze time to end of hold
time. For control mode with adjustment
cylinder 50 ms before current 1st head.
Special case for
pneumatic head
and activated
(internal)
displacement
measuring:
Error part detection
head 1
X2.23
O23 Part detection
evaluation head 2
100 mA at 24 V Output from start squeeze time to end of hold
time. For control mode with adjustment
cylinder 50 ms before current 2nd head.
Special case for
pneumatic head
and activated
(internal)
displacement
measuring:
Error part detection
head 2
X2.24
O24 Start displacement
head 1
100 mA at 24 V Signal during on-time head 1.
Special case for
pneumatic head
and activated
(internal)
displacement
measuring:
Error displacement
head 1
X2.25
O25 Start displacement
head 2
100 mA at 24 V Signal during on-time head 2.
Special case for
pneumatic head
and activated
(internal)
displacement
measuring:
Error displacement
head 2
X2.26
O26 Counter pre-
warning active
100 mA at 24 V A signal occurs if the set value is reached.
X2.27
O27 Action counter
complete
100 mA at 24 V Reset to initial program (sequence abort).