Miyachi Amada ISQ20 Series, Руководство по эксплуатации

Страница: 25 / 63

ISQ20
Connections
76609605EN-ISQ20-V1.2.docx 25/63
Pin
I/O Function Note
X1.19
I19 Ini 2 head 2
back/top 2.5 mA at 24 V Necessary with two stroke cylinders or two
pincers.
Display shows error, if welding head is not
back.
See also connector X3.4.
X1.20
I20 Ini 3 stroke 1
ahead/top 2.5 mA at 24 V Necessary with one stroke cylinder.
Display shows error, if welding head is not
ahead.
See also connector X3.7.
X1.21
I21 Ini 4 stroke 2
ahead/top 2.5 mA at 24 V Necessary with two stroke cylinders.
Display shows error, if welding head is not
ahead.
See also connector X3.10.
X1.22
I22 Ini 5 stroke 1
back/bottom 2.5 mA at 24 V Necessary with one stroke cylinder or pincers.
Display shows error, if welding head is not
back.
See also connector X3.13.
X1.23
I23 Ini 6 stroke 2
back/bottom or
pincers locked 2.5 mA at 24 V Necessary with two stroke cylinders or two
pincers.
Display shows error, if welding head is not
back.
See also connector X3.16.
X1.24
I24 Pressure switch
head 1 or initiator
2.5 mA at 24 V A connected pressure switch signalizes that
welding pressure in head 1 has been
achieved.
The input is queried before the on-time starts.
If it is not set at this time, it waits until it is set.
This function can be deactivated in basic
settings menu if no pressure switch is
provided or if this function is not required.
The unit indicates “error” if the input changes
during the welding time to “low” (error 61).
See also connector X3.19.
X1.25
I25 Pressure switch
head 2 or initiator
2.5 mA at 24 V A second connected pressure switch
signalizes that welding pressure in head 2 has
been achieved.
The input is queried before the on-time starts.
If it is not set at this time, it waits until it is set.
This function can be deactivated in basic
settings menu if no pressure switch is
provided or if this function is not required.
The unit indicates “error” if the input changes
during the welding time to “low” (error 61).
See also connector X3.22.
X1.26
I26 External part
detection ok head
1
2.5 mA at 24 V Limits for displacement ok, displacement
measuring device has to be connected.
Special case for
pneumatic head
and activated
(internal)
displacement
measuring:
Activation option
reference run head
1