Miyachi Amada ISQ20 Series, Руководство по эксплуатации

Страница: 21 / 63

ISQ20
Connections
76609605EN-ISQ20-V1.2.docx 21/63
4 Connections
4.1 Overview
No. Name Description Mode
XN
Power connection
X1
Binary inputs BIN IN DSUB 37 pin
X2
Binary outputs BIN OUT DSUB 37 socket
X3
Initiators DIST DSUB 25 socket
X4
Valves RESOLVER DSUB 15 socket
X5
Start START Binder 6+PE socket
X6
Proportional valve head 1 V1 Binder 7-pol. socket
X7
Pressure sensor head 1 PS1 Binder 4-pol. socket
X8
Proportional valve head 2 V2 Binder 7-pol. socket
X9
Pressure sensor head 2 PS2 Binder 4-pol. socket
X10
Voltage measurement 1 U1 Binder 5-pol. socket
X11
Voltage measurement 2 U2 Binder 5-pol. socket
X12
I/O Binary BIN I/O DSUB 15 socket
X13
Displacement sensor DIST DSUB 15 socket
X14
CAN CAN DSUB 9 pin
X20
MFT1-connection
(on the front panel behind the
cover plate) MFT1 RJ45 socket
X21
RS232 (on the front panel) RS232 DSUB 9 socket
Additionally for ISQ20-8-AC, ISQ20-10-DC, ISQ20-20-DC:
X30
Welding transformer
X31
Thermo sensor
X32
Current measuring coil
Toggle switches S1, S2, S3:
S1
Changeover GND/proportional valve (connectors X6, X7)
ext. (prop): switch to the left
int. (ISQ):
switch to the right
S2
Changeover GND/proportional valve (connectors X8, X9)
S3 internal
: supply voltage 24 V DC is supplied internally (max. 1.5 A)
external
: supply voltage 24 V DC is supplied externally
(input: X2 pin 33/34 to GND 35/36).
4.2 RS232 Serial Interface
The RS232 (X21) interface is situated on the front panel. It is used for transmitting data
between the ISQ20 and a computer.
The necessary cable you can order with order no.
77066028
.
The
format of the data output
can be changed via the operating panel (default format
for data output with OP-AWS3/TP-AWS3: AWS3 mode, with MFT1: classic mode).
4.2.1 Data Transfer
After each welding cycle the measuring results are transmitted via the RS232.