Mixergy M0008, Инструкции по установке и обслуживанию

Страница: 26 / 35

26
Commissioning
Pairing the cylinder and connecting to the internet
In the case that the cylinder does not automatically pair to the
powerline adapter or connection to an existing homeplug AV net-
work is desired, please follow the steps below to pair the cylinder
to the network.
1. Remove the plastic cap from the pairing hole located in the
rear right corner of the controller.
2. Use a pen or tool to depress and hold the pair button for 1 - 2
seconds.
3. Depress the pair button on the powerline adapter for 1-2 sec-
onds within 2 minutes of step 2.
4. Observe all 3 LEDs as solid green on the powerline adapter.
Ensure the plastic cap is replaced in the pairing hole once pairing
is completed.
3
1
2
4
The cylinder must be registered and connected
online in order to validate the manufacturer’s 25 yr
warranty.