manualshive.com logo in svg

Mitsubishi QJ71MT91, Руководство пользователя

Mitsubishi QJ71MT91 - Универсальный модуль Ethernet для систем ПЛК Mitsubishi. Предлагаем бесплатное скачивание инструкции по эксплуатации на manualshive.com. Руководство пользователя доступно для загрузки в формате PDF. Обеспечивает простое и надежное подключение к сети Ethernet для передачи данных.

Поделиться
Скачать
background image

 

WARRANTY 

Please confirm the following product warranty details before using this product. 
 

1. Gratis Warranty Term and Gratis Warranty Range 

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product 
within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service 
Company. 
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be solely at 
the customer’s discretion.  Mitsubishi shall not be held responsible for any re-commissioning, maintenance, or testing on-
site that involves replacement of the failed module. 

[Gratis Warranty Term] 

The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated 
place. 
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, and 
the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of repair 
parts shall not exceed the gratis warranty term before repairs. 

[Gratis Warranty Range] 

(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., 

which follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution labels 
on the product. 

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases. 

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure caused 

by the user's hardware or software design. 

2. Failure caused by unapproved modifications, etc., to the product by the user. 
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if functions 

or structures, judged as necessary in the legal safety measures the user's device is subject to or as necessary 
by industry standards, had been provided. 

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced. 

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force 

majeure such as earthquakes, lightning, wind and water damage. 

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from Mitsubishi. 
7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user. 

 

2. Onerous repair term after discontinuation of production 

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is discontinued. 

Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc. 

(2) Product supply (including repair parts) is not available after production is discontinued. 

 

3. Overseas service 

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at each FA 
Center may differ. 

 

4. Exclusion of loss in opportunity and secondary loss from warranty liability 

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any cause 
found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi 
products, special damages and secondary damages whether foreseeable or not , compensation for accidents, and 
compensation for damages to products other than Mitsubishi products, replacement by the user, maintenance of on-site 
equipment, start-up test run and other tasks. 

 

5. Changes in product specifications 

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice. 

 

6. Product application 

(1) In using the Mitsubishi MELSEC programmable controller, the usage conditions shall be that the application will not 

lead to a major accident even if any problem or fault should occur in the programmable controller device, and that 
backup and fail-safe functions are systematically provided outside of the device for any problem or fault. 

(2) The Mitsubishi programmable controller has been designed and manufactured for applications in general industries, 

etc. Thus, applications in which the public could be affected such as in nuclear power plants and other power plants 
operated by respective power companies, and applications in which a special quality assurance system is required, 
such as for Railway companies or Public service purposes shall be excluded from the programmable controller 
applications. 
In addition, applications in which human life or property that could be greatly affected, such as in aircraft, medical 
applications, incineration and fuel devices, manned transportation, equipment for recreation and amusement, and 
safety devices, shall also be excluded from the programmable controller range of applications. 
However, in certain cases, some applications may be possible, providing the user consults their local Mitsubishi 
representative outlining the special requirements of the project, and providing that all parties concerned agree to the 
special circumstances, solely at the users discretion. 

Содержание QJ71MT91





































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QJ71MT91

ABB FPBA-01 PROFIBUS DP Quick Installation And Start-Up Manual preview
FPBA-01 PROFIBUS DP
Бренд: ABB Страницы: 2
ABB ControlMaster CM15 Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 4
Parker A4W Series Installation And Service Information preview
A4W Series
Бренд: Parker Страницы: 12
Samson 3372 User Manual preview
3372
Бренд: Samson Страницы: 8
Samson 3249 Mounting And Operating Instructions preview
3249
Бренд: Samson Страницы: 60
Samson 2405 Series Mounting And Operating Instruction preview
2405 Series
Бренд: Samson Страницы: 40
B&G ZEUS S Detailed App Manual preview
ZEUS S
Бренд: B&G Страницы: 19
Widex RC4-1 User Instructions preview
RC4-1
Бренд: Widex Страницы: 17
BABYTREND Expedition EX Double Jogger Instruction Manual preview
Expedition EX Double Jogger
Бренд: BABYTREND Страницы: 18
Ubiquiti UA-Hub Quick Start Manual preview
UA-Hub
Бренд: Ubiquiti Страницы: 16
H3C LSVM2106SFAN User Manual preview
LSVM2106SFAN
Бренд: H3C Страницы: 15
Vag GA INSTRUMENTS K-1255 Installation, Operation And Maintenance Manual preview
GA INSTRUMENTS K-1255
Бренд: Vag Страницы: 7
D+H RTR 231 Original Instructions preview
RTR 231
Бренд: D+H Страницы: 2
B meters IWM-PL4 Installation preview
IWM-PL4
Бренд: B meters Страницы: 2
OBO Bettermann C50-0-255 Installation Instructions Manual preview
C50-0-255
Бренд: OBO Bettermann Страницы: 6
Secutron MR-2320 Series Installation And Operation Manual preview
MR-2320 Series
Бренд: Secutron Страницы: 92
Fermax LYNX SKYLINE Installer Manual preview
LYNX SKYLINE
Бренд: Fermax Страницы: 68
B&R SITEMANAGER 1115 Initial Setup preview
SITEMANAGER 1115
Бренд: B&R Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды