Mitsubishi Pajero Pinin 1999, Руководство по ремонту

Страница: 840 / 919

SWS ±
General Information/Special Tools
54B-5
ROOM LAMP
With the room lamp switch in the DOOR position,
the ETACS-ECU controls the room lamp operation
as follows:
D
When a door is opened from outside or inside
[with the ignition switch turned to LOCK (OFF)
position]:
When a door is opened, the ETACS-ECU
causes the room lamp to be illuminated at the
100% intensity. When the door is closed, it dims
out the room lamp to 65% intensity and approx.
30 seconds later, turns out the lamp completely.
During this period (timer controlled period), the
room lamp does out if the ignition switch is turned
to ON position or the doors are locked.
D
When a door is opened or closed with the ignition
switch in the ON position:
The room lamp illuminates at 100% intensity
when a door is opened and turned out when
it is closed.
D
When no door is opened and the ignition key
is removed:
When the ignition key is removed with all the
doors closed, the room lamp is illuminated at
an intensity of 65% and turned out approx. 30
seconds later. During that time (timer-controlled
period), the room lamp does out if the ignition
key is inserted and turned to ON position or
the door locking system is activated.
D
Room lamp's answerback operation in response
to door lock control by keyless entry system:
To allow the driver to ascertain the result of
the door locking/unlocking control action by the
use of the keyless entry system, the
ETACS-ECU causes the room lamp to blink
twice when the doors are locked through the
system and to illuminate for approx. 15 seconds
when the doors are locked.
The room lamp's answerback operation in
response to a keyless entry system control
action is accompanied by operation of the
hazard warning lamps.
SPECIAL TOOLS
Tool Number Name Use
MB991502 MUT-
II
sub
assembly
Checking of the SWS
(Diagnosis code display and input check
with the MUT-
II )
MB991529 Diagnosis code
check harness Simple diagnosis
A
B
C
D
MB991223
A: MB991219
B: MB991220
C: MB991221
D: MB991222 Harness set
A: Test harness
B: LED harness
C: LED harness
adapter
D: Probe
Measurement of terminal voltage at ECUs
A: Connector pin contact pressure inspec-
tion
B: Power circuit inspection
C: Power circuit inspection
D: Commercial tester connection