Mitsubishi Pajero Pinin 1999, Руководство по ремонту

Страница: 150 / 919

GDI ±
Troubleshooting
13A-78
Terminal
No.
Normal condition Check requirements (engine condition) Check item
21 Fuel pump relay Ignition switch: ON Engine: stopped System voltage
Engine: Idling 0 ± 3 V
31 Engine warning lamp Ignition switch: OFF
→
ON 0 ± 3 V
→
System
voltage (after several
seconds)
41 Sensor power supply Ignition switch: ON 4.5 ± 5.5 V
42 Power supply to
accelerator pedal
position sensor Ignition switch: ON 4.5 ± 5.5 V
43 Crank angle sensor Engine: Cranking 0.4 ± 4.0 V
Engine: Idling 1.5 ± 2.5 V
44 Engine coolant
temperature sensor Ignition switch: ON Engine coolant
temperature: 0
_
C
3.2 ± 3.8 V
Engine coolant
temperature: 20
_
C
2.3 ± 2.9 V
Engine coolant
temperature: 40
_
C
1.3 ± 1.9 V
Engine coolant
temperature: 80
_
C
0.3 ± 0.9 V
45 Tachometer output Engine: 3,000 r/min 2.0 ± 9.0 V
47 Power supply Ignition switch: ON System voltage
59
50 Camshaft position
sensor Engine: Cranking 0.3 ± 3.0 V
sensor
Engine: Idling 0.5 ± 3.5 V
51 Barometric pressure
sensor Ignition switch: ON Altitude: 0 m 3.7 ± 4.3 V
sensor
Altitude: 1,200 m 3.2 ± 3.8 V
52 Alternator FR terminal
D
Engine: Warm up, and then idling
D
Radiator fan: not operating
D
Headlamp: OFF
→
ON
D
Stop lamp: OFF
→
ON
D
Rear defogger switch: OFF
→
ON
Voltage decrease
54 Power steering fluid
pressure switch Engine: Warm up, and
then idling Steering wheel
stationary System voltage
Steering wheel turning 0 ± 3 V
55 Injector driver relay Ignition switch: OFF 0 ± 0.1 V
Ignition switch: ON 0.5 ± 1.0 V
56 Throttle valve control
servo relay Ignition switch: OFF 0 ± 0.3 V
servo relay
Ignition switch: ON 0.5 ± 1.0 V