●
If you press any of the switches above and “
” is displayed, the switch has no function.
●
When you operate the air conditioning system for the first time after turning the power supply on, the air conditioning system
starts operating with the following settings. Change the settings according to your preference.
Central control ........................................ Turned off
Operation mode ...................................... If automatic mode is available: AUTO COOL
If automatic mode is not available: COOL
Setting temperature ................................ 23
°
C
Fan speed ...............................................
Louver position ....................................... Horizontal
When automatic operation is disabled, the air conditioning system operates in the following mode:
COOL if the remote controller suction temperature is 17
°
C or more
HEAT if the remote controller suction temperature is less than 17
°
C
●
The operation may be stopped if you increase/decrease the setting temperature by pressing the temperature setting switches.
This occurs because the temperature controller is activated; this is not a failure.
●
At cooling (heating), the air conditioning system may activate the cooling (heating) operation to maintain a comfortable room
temperature even when the room temperature is at the setting temperature or less (more); this is not a failure.
●
During dehumidifying operation, the fan speed is adjusted automatically according to the room temperature, and may therefore
change repeatedly between the strong, weak and stop speeds. The airflow volume cannot be adjusted by the FAN SPEED
switch.
●
If the heating/cooling free layout multi system KXR is used and the operation mode is changed (from COOL to HEAT or from
HEAT to COOL), the airflow volume becomes weak for three minutes.
●
During automatic operation, the mode is switched between COOL and HEAT automatically according to the difference between
the setting temperature and room temperature to keep the room temperature constant (in case of the heating/cooling free layout
multi system KXR).
NOTE
Press the “
TIMER” switch.
The remote controller goes into the timer mode.
The “current day of the week” and “current time” are dis-
played and the subsequent steps are automatically displayed
as follows.
[Example] In the case of Monday, 10 o'clock in the morning
‚
Display area: “
”
“
”
“
” (lit for 1 second)
‚
“
” (lit for 1 second)
‚
“
” (lit)
Press the “
SET” switch.
The selected timer mode is committed.
For instructions on using each timer mode setting, see the
next page and beyond.
It is also possible to select a combination of timer modes. The
upper left modes can be selected at the same time.
SELECTING TIMER MODES
Press the
or
switch.
If you press the
switch, the display of the following timer
modes is switched in the downward direction.
“
” (Adjust the current time)
‚
“
” (Turn off after the specified time)
‚
“
” (Turn off at the specified time)
‚
“
” (Turn on at the specified time)
‚
“
” (Select the weekly timer mode)
‚
“
” (Cancel the timer setting)
If you press the
switch, the display of the timer modes is
switched in the upward direction.
1
2
3
●
If you press the “
” switch while in the timer setting mode, the remote controller exits from the timer mode
and returns to the original display. Please be aware that settings that have not been committed become invalid.
●
If you have selected the on timer mode and either the off timer or sleep timer mode at the same time with the same time setting,
the timer mode that turns off the operation (the off timer or sleep timer mode) takes the precedence.
●
If you press any of the timer-related switches and “
” is displayed, the switch cannot be operated because the
switch operation is disabled. To enable the operation, consult the dealer from whom you purchased the air conditioning system.
●
If you do not press any switches for 60 seconds after entering the timer mode, the remote controller automatically exits from the
timer mode and returns to the original display.
●
If a power failure occurs, the timer settings that have been specified are canceled. Weekly timer settings will return to the display
where all days of the week are selected as “holidays” after the power failure.
NOTE
HOW TO PERFORM THE TIMER OPERATION
4
Sleep timer
Off timer
On timer
Weekly timer
Combination of Modes that can be Set Together
(
: Possible,
×
: Not possible)
Off timer
×
×
On timer
×
Weekly timer
×
×
×
If you select a combination of modes that cannot be set together and press
the SET switch, the message “
” (Invalid Operation)
is displayed for 3 seconds, and the display returns to the display selected
in step 2.
Sleep timer
×
×
2
1
3
PCA012A001H_E_P04
05.11.16, 12:15
4
