10
4.1. For Wired Remote-controller
■
Timer functions are different by each remote controller.
■
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
4. Timer
E.O.
SW
Note:
• Details of emergency mode are as shown below.
Operation mode
COOL
HEAT
Set temperature
24°C
24°C
Fan speed
High
High
Air
fl
ow direction
Horizontal
Downward 4 (5)
5. Emergency Operation for Wireless Remote-controller
(For PKA-RP·HAL)
Fig. 5-1
Fig. 5-2
When the remote controller cannot be used
When the batteries of the remote controller run out or the remote control-
ler malfunctions, the emergency operation can be done using the emer-
gency buttons.
[Fig. 5-1]
A
DEFROST/STAND BY lamp
B
Operation lamp
C
Emergency operation switch (heating)
D
Emergency operation switch (cooling)
E
Receiver
Starting operation
• To operate the cooling mode, press the button
D
for more than 2
seconds.
• To operate the heating mode, press the
button
C
for more than 2
seconds.
Stopping operation
• To stop operation, press the button
D
or the
button
C
for more
than 2 seconds.
[Fig. 5-2]
A
DEFROST/STAND BY lamp (Orange)
B
Operation lamp (Green)
C
Emergency operation switch (cooling/heating)
D
Receiver
• Each press of the emergency operation switch will toggle the operation
mode.
• Check “COOL/HEAT” with the operation monitor display. (The orange
lamp
A
follows this monitor display for 5 seconds after pressing the
emergency operation switch.)
Operation Monitor Display
GREEN ORANGE
STOP
○
○
The orange lamp follows the
switch operation as indicated at
the left for 5 seconds, and then it
will return to the normal display.
COOL
●
○
HEAT
●
●
○
: Turning off
●
: Lighting
[Heat pump type]
[Cooling only type]
Cooling
Heating
Stop
Cooling
Stop
