Mitsubishi MJ-E26VX-A1, Руководство по обслуживанию

Страница: 13 / 47

3
Reattach the tank lid and replace
the water tank.
Check the lid and guard are secure. Slide the
tank in with both hands (you should hear a
beep.)
¡
Secure the lid and guard properly or else the
tank may become stuck.
¡
If the tank is not installed correctly, the tank full
light will come on, and the unit will not operate.
13
Pour the water out
as shown.
Removing Water from the Tank
1
Remove the water tank.
Floating element
Do not remove or dismantle
the float.
Note
Hold the tank this way
Grasp handle and slide out.
Do not remove or dismantle the floating element
in the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
Tank lid
The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 5L) is full. Empty the
tank.
Tank guard
2
Remove the tank lid, and empty.