Mitsubishi MJ-E26VX-A1 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 47

Mitsubishi MJ-E26VX-A1 Скачать руководство пользователя страница 7

7

¡

To dry the inside

The inside of the unit can be dried to suppress mildew growth on the cooler.
On days the dehumidifier is used, internal drying (drying the inside) is recommended.

<Internal drying operation>

This operation takes approximately one hour. However, when the

room temperature is below 1°C, drying time is shortened to protect

the compressor.

OFF

Regular
operation

Dehumidifier
Air purifier

Internal drying operation

(approx. one hour.)

Airflow

Approx.
30min.

Airflow stops; compres-
sor activates (operating
sound)

Compressor operates
according to room temperature

Approx. 20min.

Compressor
stops

Airflow

Approx.
10min.

Unit
stops
auto-
mati-
cally

Operating

sounds

To abort internal drying

Press the mildew guard elite button while
the unit is performing internal drying (the
mildew guard elite lamp turns off)

Press the power button to abort internal
drying, and resume normal operation.

∞

Turning off at the wall deactivates automatic operation.

∞

This function does not remove existing mildew. Also, aborting internal drying may cause the benefits
to diminish.

∞

Do not close the louvres while internal drying as this causes noise.

∞

The moisture expelled from inside the unit may cause the humidity level of the room to rise.

∞

The air leaving the unit may appear white depending on the humidity or temperature of the room.

∞

The moisture expelled from inside the unit may smell due to odorants* that were not caught by the
filter dissolving in the water.
* The photocatalytic filter is mainly for absorbing ammonia.

∞

The OFF timer cannot be set during internal drying.

Information

Press

while the unit is off

Press

while the unit is on

Manual operation

To activate internal drying by pressing a
button.

¡

Internal drying starts

The mildew guard elite lamp flashes, the
humidity indicator turns off, and the louvre
stops in the vertical position.

Internal drying mode

¡

Internal drying ends

Mildew guard elite lamp turns off and the
louvres shut.

Automatic operation

To activate internal drying after every use.

¡

Internal drying standby

(Mildew guard elite lamp lit)

Internal drying starts when operation ends

When the unit is turned off, LAUNDRY mode
ends, or the OFF timer ends.

¡

Internal drying starts

The mildew guard elite lamp flashes, the
humidity indicator turns off, and the louvre
stops in the vertical position.

Internal drying mode

¡

Internal drying ends

The mildew guard elite lamp turns off and the
louvres shut.

<To deactivate automatic operation>

Press the MILDEW GUARD ELITE button while the
unit is on (the mildew guard elite lamp turns off)

e_mj_e26vx_a1(01_23)33j.qk 05.12.20 11:32 AM ページ 7

«
...
5
6
7
8
9
...
»

Содержание MJ-E26VX-A1
















































Отзывы:

Нет отзывов