Mitsubishi HS-U748, Руководство по обслуживанию

Страница: 26 / 81

- 13 -
a
PINCH ARM
CAP
Part
Part
PINCH ASSY
MAIN CAM
Rib
A
B
Fig. 2-17
GREASE
(MULTEMP AC-DM)
F/L PLATE
DOOR ARM
ARM (TU)
MAIN CAM
GREASE
(MOLYKOTE
G PASTE)
MAIN PLATE
ASSY
GREASE
(MULTEMP AC-DM)
Back
GREASE
(MOLYKOTE
G PASTE)
GREASE
(MULTEMP AC-DM)
Fig. 2-18-1
2-17.PINCH ARM CAP, PINCH ASSY
SET POSITION : Normal
(Removal)
1. Release the two catches (
a
) of the PINCH ARM CAP
shown in the Fig. 2-17 to remove the PINCH ARM
CAP.
2. Remove the PINCH ASSY shown in the Fig. 2-17.
(Installation)
1. Insert Part
A
of the PINCH ASSY shown in the Fig. 2-
17 in the most external groove of the MAIN CAM.
2. Install the PINCH ARM CAP matching the Part
B
of
the PINCH ARM CAP with the Rib of the MAIN PLATE
ASSY.
2-18.F/L PLATE, DOOR ARM
SET POSITION : Normal
Remove the following parts before replacing the F/L
PLATE, DOOR ARM. Refer to the corresponding items to
install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• SENSOR COVER (TU) (Item 2-10)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH ASSY (Item 2-17)
(Removal)
1. Slightly lift the back of the F/L PLATE (MAIN CAM
side) shown in the Fig. 2-18-1 to remove the F/L
PLATE.
2. Remove the DOOR ARM.
(Installation)
1. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the points on the new F/L PLATE specified in the Fig.
2-18-1.
2. Apply GREASE (MOLYKOTE G PASTE)
[859D055O50] to the points on the new F/L PLATE
specified in the Fig. 2-18-1.