Mitsubishi HS-U748, Руководство по обслуживанию

Страница: 23 / 81

- 10 -
SLIP ADJUSTER
Center of the
BELT PULLEY
IDLER UNIT
Match the Lug of the
SLIP ADJUSTER with
the Center Notch of
the IDLER UNIT.
Apply GREASE
(PG-641)
to the parts .
PULLEY GEAR ASSY
Felt Side
SLIP GEAR
Grooved Side
Fig. 2-14-4
Fig. 2-14-3
Apply GREASE (PG-641) to the parts .
SLIP SPRING
SLIP 2 WASHER
[SLIP GEAR side]
[THRUST WASHER side]
Straight end
Fig. 2-14-5
9. Install the units from the SLIP 2 WASHER to REEL
BELT shown in the Fig. 2-14-1.
Note1 : Be sure to replace the removed PULLEY BUSH
with a new one.
Note2 : Attach the SLIP SPRING with its straight end
facing the SLIP GEAR side.
Note3 : Attach the SLIP 2 WASHER with its position set
as shown in the Fig. 2-14-5.
Note4 : Apply GREASE (PG-641) [859D055O30] to the
part on the SLIP 2 WASHER specified in the Fig.
2-14-5.
10. Install the SHIFT SLIDER to the SHIFT LEVER shown
in the Fig. 2-14-1.