Mitsubishi HS-U748, Руководство по обслуживанию

Страница: 25 / 81

- 12 -
b
b
c
a
a
LOADING MOTOR ASSY
FC HOLDER
LOADING
WORM
MOTOR
HOLDER
LUG TERMINAL
WORM WHEEL
Fig. 2-16-1
WORM WHEEL LOADING WORM
Apply GREASE (MULTEMP AC-DM) to the parts .
Fig. 2-16-2
2-16.FC HOLDER, MOTOR HOLDER,
LOADING WORM, LOADING MOTOR
ASSY, WORM WHEEL
SET POSITION : Normal
(Removal)
1. Release the two catches (
a
) of the FC HOLDER
shown in the Fig. 2-16-1 to remove the FC HOLDER.
2. Remove the two screws (
b
) fastening the MOTOR
HOLDER shown in the Fig. 2-16-1 to remove the
MOTOR HOLDER.
3. Remove the two screws (
c
) fastening the LOADING
MOTOR ASSY shown in the Fig. 2-16-1 to remove the
LOADING MOTOR ASSY and LOADING WORM.
4. Remove the WORM WHEEL.
(Installation)
1. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the LOADING WORM shown in the Fig. 2-16-2.
2. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the WORM WHEEL shown in the Fig. 2-16-2.
3. Install the WORM WHEEL.
4. Install the LOADING WORM, LOADING MOTOR
ASSY to the MOTOR HOLDER.
Note : Tighten the screw (
c
) shown in the Fig. 2-16-1
after putting the LUG TERMINAL on the screw.
5. Install the MOTOR HOLDER.
6. Install the FC HOLDER.