Mitsubishi HS-U748, Руководство по обслуживанию

Страница: 37 / 81

- 24 -
TAPE GUIDE ASSY (SP)
TAPE GUIDE ASSY (TU)
Fig. 2-32-1
GUIDE CATCHER (SP)
GUIDE CATCHER (TU)
Front of
MAIN PLATE ASSY
Back of
MAIN PLATE ASSY
Apply GREASE (MULTEMP AC-DM) to the parts .
Fig. 2-32-2
2-32.TAPE GUIDE ASSY (SP),
TAPE GUIDE ASSY (TU)
SET POSITION : Normal
Remove the following parts before replacing the TAPE
GUIDE ASSY (SP), (TU). Refer to the corresponding
items to install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH ASSY (Item 2-17)
• BRAKE CAM PLATE (Item 2-19)
• BRAKE BELT (SP) (Item 2-23)
• BELT HOLDER (Item 2-23)
• BELT LEVER (Item 2-24)
• TENSION ARM (Item 2-25)
(Removal)
1. Loosen the TAPE GUIDE ASSY (SP) shown in the
Fig. 2-32-1 (turn it fully in the Unloading direction) to
remove it.
2. Loosen the TAPE GUIDE ASSY (TU) shown in the
Fig. 2-32-1 (turn it fully in the Unloading direction) to
remove it.
(Installation)
1. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the parts on the MAIN PLATE ASSY specified in the
Fig. 2-32-2.
2. Install the TAPE GUIDE ASSY (SP) shown in the Fig.
2-32-1.
3. Install the TAPE GUIDE ASSY (TU) shown in the Fig.
2-32-1.
4. Perform the Item 3-2-1. "GUIDE ROLLER Check" to
the Item 3-2-5. "Flatness Check of FM Waveform" of
the "Interchangeability Adjustment of the Mechanism".