Mitsubishi FX3G-14MR/ES, Руководство по установке

Страница: 15 / 24

FX3G INSTALLATION MANUAL
15
3. Click the BROWSE button and set “Easysocket\USBdrivers”
in the folder where GX Works2 has been installed to “Copy
manufacturer’s files from:”, and then click the OK button. If multiple
MELSOFT products are installed previously, refer to their installed
location.
POINT
Considerations when installing USB driver:
If the USB driver cannot be installed, confirm the following Windows
®
settings.
• If “Block - Prevent installation of unsigned files” is selected under
[Control Panel] - [System] - [Hardware] - [Driver Subscription], the
USB driver may not be installed.
• Select “Ignore - Install all files, regardless of file signature”, or “Warn
- Display a message before installing an unsigned files” in [Driver
Subscription], and execute the USB driver installation.
WHEN USING WINDOWS
®
XP
OPERATING PROCEDURE
1. Connect the personal computer and the programmable controller
CPU with a USB cable, and then turn on the programmable
controller CPU.
2. The Found New Hardware Wizard screen is displayed. Select “Install
from a list or specific location (Advanced)”.
3. Select “Search for the best driver in these locations” on the
displayed screen. Select “Include this location in the search”, and
then set “Easysocket\USBdrivers” in the folder where GX Works2
has been installed. If multiple MELSOFT products are installed
previously, refer to their installed location.
POINT
Considerations when installing USB driver:
If the USB driver cannot be installed, confirm the following Windows
®
settings.
• If “Block - Never install unsigned driver software” is selected under
[Control Panel] - [System] - [Hardware] - [Driver Signing], the USB
driver may not be installed.
• Select “Ignore - Install the software anyway and don’t ask for my
approval”, or “Warn - Prompt me each time to choose an action” in
[Driver Signing], and execute the USB driver installation.
WHEN USING WINDOWS VISTA
®
OPERATING PROCEDURE
1. Connect the personal computer and the programmable controller
CPU with a USB cable, and then turn on the programmable
controller CPU.
1. The Found New Hardware screen is displayed. Select “Locate and
install driver software (recommended)”.
1. Select “Browse my computer for driver software (advanced)” on the
Found New Hardware screen.
1. Specify “Easysocket\USBdrivers” in the folder where GX Works2
has been installed on the displayed screen. If multiple MELSOFT
products are installed previously, refer to their installed location.
Select “Include subfolders”.
POINT
Considerations when installing USB driver:
When the
Windows can’t verify the publisher of this driver software
screen is displayed during the installation, select “Install this driver
software anyway”.
WHEN USING WINDOWS
®
7
OPERATING PROCEDURE
1. Connect the personal computer and the programmable controller
CPU with a USB cable, and then turn on the programmable
controller CPU.
2. From Windows
®
Control Panel, select [System and Security] -