Mitsubishi FX3G-14MR/ES, Руководство по установке

Страница: 14 / 24

FX3G INSTALLATION MANUAL
14
Transistor output
Item
FX3G-
14MT/_
FX3G-
24MT/_
FX3G-
40MT/_
FX3G-
60MT/_
Number of Output
Points
6 points
(8) *1
10 points
(16) *1
16 points 24 points
Connecting Type Removable terminal block (M3 screw)
Output Type/Form
Transistor/sink output (FX3G-_MT/ _S)
Transistor/source output (FX3G-_MT/_SS)
External Power Supply
5 to 30VDC
Maximum
Load
Resistance
Load
0.5A/point
The total load current of resistance loads per common
terminal should be the following value.
• 1 output point/common terminal: 0.5A or less
• 4 output points/common terminal: 0.8A or less
Inductive
Load
12W/24VDC
The total of inductive loads per common terminal should
be the following value.
• 1 output point/common terminal: 12W or less/24VDC
• 4 output points/common terminal: 19.2W or less/24VDC
Open Circuit Leakage
Current
0.1mA or less/30VDC
ON Voltage 1.5 V or less
Response
Time
OFF – ON
Y000, Y001:5µs or less/
10mA or more (5 to 24VDC)
Y002 or more:0.2ms or
less/200mA or more
(at 24VDC)
Y000 to Y002:5µs or less/
10mA or more (5 to 24VDC)
Y003 or more:0.2ms or
less/200mA or more (at
24VDC)
ON – OFF
Y000, Y001:5µs or less/
10mA or more (5 to 24VDC)
Y002 or more:0.2ms or
less/200mA or more (at
24VDC)
Y000 to Y002:5µs or less/
10mA or more (5 to 24VDC)
Y003 or more:0.2ms or
less/200mA or more (at
24VDC
Input Circuit Insulation Photocoupler insulation
Input Operation Display LED on panel lights when photocoupler is driven
n
OUTPUT CIRCUIT CONFIGURATION
1. Each value inside ( ) indicates the number of occupied points.
n
PROTECTION CIRCUIT FOR LOAD SHORT-CIRCUITS
A short-circuit at a load connected to an output terminal could cause
burnout at the output element or the PCB. To prevent this, a protection
fuse should be inserted at the output. Use a load power supply
capacity that is at least 2 times larger than the total rated fuse capacity.
n
CONTACT PROTECTION CIRCUIT FOR INDUCTIVE LOADS
When an inductive load is connected, connect a diode (for
commutation) in parallel with the load as necessary. The diode (for
commutation) must comply with the following specifications.
Item Guide
Reverse voltage 5 to 10 times of the load voltage
Forward current Load current or more
n
INTERLOCK
Loads, such as contactors for normal and reverse rotations, that must
not be turned on simultaneously should have an interlock in the PLC
program and an external interlock.
5. PROGRAMMING USING GX WORKS2
The software package GX Works2 is a programming tool designed
to be used with FX3G programmable controller. GX Works2 runs on
Microsoft® Windows
® 95, Windows ® 98, Windows ® Me, WindowsNT ®
Workstation 4.0, Windows ® 2000, Windows ® XP, Windows Vista ® ,
Windows
®
7, and Windows
®
8 (hereafter referred to collectively as
Windows
®
). The software has been designed to be both powerful and
user friendly. While many of the software features can be learned
intuitively, a detailed help file has been incorporated into the software
to assist users in finding answers to their questions.
5.1 SYSTEM CONFIGURATION
5.2 INSTALLING THE USB DRIVER
In order to communicate with a programmable controller CPU via USB,
a USB driver needs to be installed.
The following explains the procedure of USB driver installation.
WHEN USING WINDOWS ® 2000 PROFESSIONAL
OPERATING PROCEDURE
1. Connect the personal computer and the programmable controller
CPU with a USB cable, and then turn on the programmable
controller CPU.
2. The Found New Hardware Wizard screen is displayed. Select
“Specify a location”.
Load
Fuse
DC power
supply
Y
COM
A common number applies
to the of [COM ].
Sink output wiring
Load
Fuse
DC power
supply
Y
+V
A common number applies
to the of [+V ].
Source output wiring
RS-232C/RS-422 cable
Connection cabling
Connection cabling for
extension devices
Expansion board
USB
RS-232C
FX
3G
-232-BD