Mitsubishi Fuso FK 2008, Руководство пользователя

Страница: 72 / 355

5-25
3 Passing signal/dimmer switch
Passing signal
Pulling the lever up activates the high beams.
Use this to flash a signal when overtaking
another vehicle.
Dimmer
With the headlamps illuminated, pushing the
lever down activates the headlamp high beams
and pulling it back to the original position reacti-
vates the low beams. When the high beams are
on, indicator lamp lights up.
4 Turn signal lamp switch
•
Turn signal
Moving the lever forward or backward activates
the corresponding turn signal causing it to flash.
At the same time, the corresponding indicator
lamp or flashes.
When the steering wheel is returned to the neu-
tral position after a right or left turn, the switch
automatically moves back to the neutral position
and the lamp stops flashing. After making a
moderate turn, however, the switch will some-
times not return automatically. In this case, put
the switch in the neutral position by hand.
•
Lane changer
Lightly pushing the lever forward or backward
causes the corresponding turn signal lamp to
flash while the lever is held in this position.
5 Hazard warning lamp switch
The hazard warning lamps may be used as a warn-
ing to other vehicles when you suddenly find it nec-
essary to stop your vehicle in emergencies.
The lamps can flash in any of the starter switch
positions.
Pulling the lever up causes all turn signal lamps to
flash simultaneously. At the same time, indicator
lamps start flashing. Pulling the lever
another time causes the lamps to stop flashing.
PASS
LOW
HIGH
Z17276
Z17277
Z17278
FKFM.book Page 25 Wednesday, June 6, 2007 11:43 AM