Mitsubishi Fuso FK 2008, Руководство пользователя

Страница: 233 / 355

12-82
Simple inspection and service
<FM65F automatic transmission vehicles>
If a large amount of dirt or mud adheres to the front
of the oil cooler, it will reduce the oil cooler's cooling
performance and cause rust.
Form time to time, wash with water the front of the
oil cooler and the cover that’s attached to it.
The oil coolers are located on both sides of the
vehicle.
CAUTION
•
Do not use a hard brush or sharp implement
for cleaning. Doing so could result in dam-
age to the oil cooler.
•
Try not to splash water on the motor of the
oil cooler’s electric cooling fan.
•
Do not use a high-pressure cleaning equip-
ment. Damage to the oil cooler may result.
Transmission oil cooler – cleaning
Cleaning your vehicle
WARNING
•
Some cleaning fluids are poisonous or
flammable. Carefully follow the safety pre-
cautions shown on the container.
•
Use solvent-based cleaning materials only
in a well ventilated area. Open the win-
dows when using solvent-based cleaning
materials in the cab.
•
The following materials could injure you or
damage the vehicle, and should not be
used: Acetone, lacquer thinner, enamel
thinner, nail enamel remover, and other
volatile solvents; laundry soap, bleach,
deoxidant, and other detergents; carbon
tetrachloride, gasoline, benzene, naphtha,
and other petrochemicals.
Z12142
FKFM.book Page 82 Wednesday, June 6, 2007 11:43 AM