Mitsubishi Fuso FK 2008, Руководство пользователя

Страница: 178 / 355

12-27
CAUTION
•
The added oil should be of the same grade
and viscosity as the oil originally placed in
the engine. Otherwise, engine malfunction
may result.
•
Take care not to add more than the specified
quantity of oil.
•
The engine can be severely damaged if the
correct engine oil level is not maintained.
1.4 Replacement
1. Tilt the cab. P. 12-6
2. Clean the surfaces around oil filler cap and
remove the oil filler cap.
3. Place a receiver under the oil filter. Loosen oil fil-
ter drain plug to let the oil flow out of the filter.
4. Remove drain plug from the oil pan to remove
the oil.
5. Tighten the oil pan drain plug and the oil filter
drain plug .
6. Carefully pour fresh engine oil through the oil
filler.
7. Wait for more than 6 minutes, then check the oil
level using the oil level gauge provided.
8. Crank the engine and then start it. P. 5-8
WARNING
Take care not to spill engine oil as engine oil
on the exhaust manifold or other hot sec-
tions of engine could catch fire. Wipe clean
the oil if spilt.
WARNING
If you remove oil immediately after operating
the vehicle, it will be extremely hot. Take care
to avoid being scalded.
Tightening torque
Oil pan drain plug 69 N·m (51 ft.lbs., 7 kgf·m)
Oil filter drain plug
7.8 ± 2 N·m (5.8 ± 1.4 ft.lbs.,
0.8 ± 0.2 kgf·m)
Z17344
Z17638
FKFM.book Page 27 Wednesday, June 6, 2007 11:43 AM