Mitsubishi Fuso FK 2008, Руководство пользователя

Страница: 222 / 355

12-71
With a new vehicle, perform out the first inspection
after 4‚000 km (2‚500 miles).
Using a torque wrench, check for loose wheel nuts
and tighten as necessary.
WARNING
•
As the vehicle is driven after a wheel has
been replaced, the wheel nuts loosen up
somewhat during the early stages of driv-
ing due to “wear-in”. Therefore, it is neces-
sary to retighten the wheel nuts to the
specified torque after driving 50 to 100 km
(30 to 60 miles). Thereafter, retighten the
nuts at regular intervals.
•
Do not paint disc wheel mounting surfaces
, dual wheel mating surfaces , wheel
nut seating surfaces , and wheel hub
mounting surfaces as resulting thicker
paint film could cause the wheel nuts to
loosen up.
Wheel nuts – check and retightening
Inspection
intervals
Every 10‚000 km (6‚000 miles)
WARNING
After changing a tire, the wheel nuts will
loosen somewhat during the initial stages of
driving due to “wear-in”. Therefore, retighten
the wheel nuts to specification after you have
driven 50 to 100 km (30 to 60 miles).
Wheel nut tightening torque
FK61F
370 to 410 N·m
(275 to 304 ft.lbs., 38 to 42 kgf·m)
Other
than
FK61F
540 to 590 N·m
(395 to 430 ft.lbs., 55 to 60 kgf·m)
Z09308
FKFM.book Page 71 Wednesday, June 6, 2007 11:43 AM