Mitsubishi Fuso FK 2008, Руководство пользователя

Страница: 276 / 355

15-5
Clutch function • • I • •
•
Press the clutch pedal to
check for unusual noise or
stiffness. Also check if gear
engages quietly.
•
Check that clutch does not
slip and engages smoothly.
12-60
Manual transmission
gearshift control loose-
ness
• • • I •
In neutral position, check gear-
shift lever for looseness. With
gearshift lever in each gear
position, check all gears engage
smoothly without excessive
looseness. Also check that con-
trol cable is not damaged.
–
Automatic transmission
range selector linkage
condition *3
• • • I •
Shifting to each position must be
correct and secure.
–
Propeller shaft cou-
plings and bearings
looseness
•
T T • •
Check flange yoke bolts and
center bearing bolts for loose-
ness.
–
• I • •
•
Turn propeller shaft manually
to check for loose spline cou-
pling.
•
Check for looseness between
spider and needle roller bear-
ing.
FRONT AND REAR AXLES
Axle shaft torsion and
cracks
• • • • I
Remove axle shaft and check
for torsion, bend, and cracks.
–
Front wheel hub bear-
ing looseness
• • • I •
With front axle jacked up, move
wheel up and down by holding
tire’s top and bottom to check for
bearing looseness.
–
Rear wheel hub bearing
damage
• • • • I
Disassemble rear wheel and
check for hub bearing wear and
damage.
–
Retightening wheel
nuts
• T T • • Check wheel nuts for looseness. 12-71
Disc wheel damage • • I • •
Check disc wheel for corrosion,
deformation and cracks.
–
Item
Time of inspection and
maintenance
Working procedures
Ref.
page
Pr
e-oper
atio
nal checks
N
ew vehicle at 4,000 km/
2,5
00 miles
Inspection
interval
Every 10,000
km/
6,0
00 miles
Every 30,000
km/
18
,000 miles *1
Every 60,000
km/
36
,000 miles *2
FKFM.book Page 5 Wednesday, June 6, 2007 11:43 AM