Mitsubishi FREQROL-SFJ, Руководство по обслуживанию

Страница: 94 / 125

Alarm
No.
Name
Description
Motion
(Note)
36 TE TRANSFER This alarm occurs if data
A
ERROR
fer does not go satisfactorily
(when FR-SFJ is connected to
CNC through bus line).
37 PE
PARAMETER This alarm occurs if set
A
ERROR
meter value is out of the per-
missible range (this check is
made when the control system is
turned on).
40 TKCE
FR-TK This alarm occurs if signal for
ECT ERROR
selection of FR-TK unit (when
FR-TK unit is used) is not input
properly.
41 TKTE FR-TK
This alarm occurs if data
A
T R A N S F E R
ERROR
munication with FR-TK unit
(when FR-TK unit is used) does
not go properly.
45 OHP
OVER HEAT This alarm occurs if ambient A
(
AMP
.)
temperature is excessively high,
or main (power) circuit semi-
conductor overheats, due to
overload or stop of cooling fan.
46 OHM
OVERHEAT This aiarm occurs if motor A
OR
RESISTOR)
heats due to overload or stop of
motor cooling fan.
52 OD
ERROR This alarm occurs if difference
A
EXCESS
(error) between referenced stop
position and true stop position
is excessively large (in posi-
tion control loop).
56
OA OTHER AXIS
This alarm occurs if trouble
A
ALARM
curs with other servo control
axis (when FR-SFJ is connected
to CNC through bus line).
91