Mitsubishi MOTORS Outlander 2018, Руководство пользователя

Страница: 260 / 441

Multi Information display - Type 2
Features and controls 5-179
5
N00556801209
The “Average fuel consumption reset mode”,
“Fuel consumption unit” and “Temperature
unit” setting can be modified as desired,
when the ignition switch is in the “ON” posi-
tion.
N00575501029
You can change the mode condition for the
average fuel consumption display to “Auto
reset” or “Manual reset”.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the driving
range display.
Refer to “Information display” on page
5-174.
2. Each time you press the multi information
display switch for 2 seconds or more on
driving range display, you can switch
reset mode for average fuel consumption.
(A: Auto reset mode, B: Manual reset
mode)
 When the average fuel consumption is
being displayed, if you hold down the
multi information display switch, these
calculations will be reset to zero.
 When the ignition switch is turned to the
“ON” position from the “ACC” or “OFF”
position, the mode setting changes auto-
matically from manual to auto.
 When the average fuel consumption is
being displayed, if you hold down the
multi information display switch, these
calculations will be reset to zero.
 When the ignition switch has been set to
the “ACC” or “OFF” position for about 4
hours or more, the average fuel consump-
tion display will automatically reset.
 When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
 If you accidentally reset the display, consult
an authorized Mitsubishi Motors dealer for
assistance.
Changing the function settings
CAUTION

The driver should not operate the display
while the vehicle is in motion.
 When operating the system, stop the vehicle
in a safe area.
Changing the reset mode for aver-
age fuel consumption
NOTE
 Manual reset mode

Auto reset mode
NOTE
 The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
 The initial (default) setting is “Auto reset
mode”.
BK0249100US.book 179 ページ ２０１７年５月１０日 水曜日 午前８時４９分