Mitsubishi MOTORS Outlander 2018, Руководство пользователя

Страница: 299 / 441

Hazard warning flasher switch
5-218 Features and controls
5
N00522701328
If you press the flasher switch, the front and
rear turn signals will flash intermittently, and
so will the hazard warning lights. This is an
emergency warning system and should not be
used when the vehicle is in motion, except for
emergencies.
If you need to leave your vehicle, the flashers
will keep working after the ignition switch is
removed or the operation mode is put in OFF.
N00579300044
ECO mode is an eco-driving support system
which automatically controls the engine, air
conditioning system, 4WD system (if so
equipped) and S-AWC (if so equipped) to
improve fuel efficiency.
Refer to Electronically controlled 4WD sys-
tem” on page 5-82.
Refer to “S-AWC (Super-All Wheel Con-
trol)” on page 5-85.
Refer to “Dual-zone automatic climate con-
trol air conditioner” on page 7-5.
The ECO mode starts working by pressing
the ECO mode switch when the ignition
switch or operation mode is in ON.
Push the switch again and the ECO mode will
cancel.
While the ECO mode is working, an ECO
mode indicator will be turned on.
N00522801420
The front fog lights illuminate only when the
headlights are on low beam.
Turning the knob in the direction of the “ON”
position turns on the front fog lights as well
as the indicator in the instrument cluster. To
turn them off, turn the knob in the direction of
the “OFF” position.
The knob will return to the neutral position
when it is released.
Hazard warning flasher
switch
NOTE
 If the flashers are used for several hours, the
battery will run down. This could make it
difficult or impossible to restart your vehicle.
ECO mode switch NOTE
 Even if the ECO mode is operating, you can
select normal operation of the air condi-
tioner.
For further information, please contact your
authorized Mitsubishi Motors dealer.
Front fog light switch
(if so
equipped)
BK0249100US.book 218 ページ ２０１７年５月１０日 水曜日 午前８時４９分