Mitsubishi MOTORS Outlander 2018, Руководство пользователя

Страница: 217 / 441

Lane Departure Warning System (LDW) (if so equipped)
5-136 Features and controls
5
N00578100045
If a problem occurs with the system, a visual
warning specific to the type of the problem is
given together with an audible alarm.
The alarm shown below is displayed if the
system becomes temporarily unavailable due
to the high or low temperature of the sensor.
After temperature of the sensor has been in
range, the system will automatically return to
operation.
If the alarm continues showing, there is a pos-
sibility that the LDW has a malfunction. Con-
tact an authorized Mitsubishi Motors dealer
for inspection of the system.
NOTE
 The warnings will not continue for more than
3 seconds, even if your vehicle continues
leaving the lane.
 If the lane markers are only on one side of
the road, the LDW will operate only for the
appropriate side where the lane marker is
drawn.
WARNING
 The LDW will not function when no lane
marker exists, such as at an intersection
or near a toll booth.
 The LDW may not operate correctly in the
following situations and the LDW may not
give warnings or may give false warnings:
• When lane markers are not clearly visi-
ble due to rain, snow, fog, dark area, etc.
• When the road surface is shiny.
• When old lane markers remain on the
road surface.
• When the lane markers are double lines
or the shape of the lane markers are
complicated.
• When driving in an extremely narrow
lane.
• When the distance between your vehicle
and a vehicle in front is short.
• When driving into the sun light.
• When driving on curves.
• When driving on bumpy roads.
• When driving in construction zones.
• When passing through a place where the
brightness suddenly changes, such as at
the entrance to or exit of a tunnel.
• When the headlights of an oncoming
vehicle are very bright.
• When the rear of your vehicle is weighed
down with the weight of passengers and
luggage.
• When the headlights of your vehicle are
not clean or are not properly aimed.
• When the front windshield is not clean.
• When the front windshield wipers do not
clean the windshield properly.
CAUTION
 To maintain proper function of the LDW:
• Always keep the windshield and the head-
lights clean.
• Do not put anything, such as a sticker, on
the front windshield in front of the sensor.
• Avoid applying a shock or load to the sen-
sor.
• Do not attempt to detach or disassemble the
sensor.
• Use only Mitsubishi Motors Genuine parts
when replacing the windshield wipers.
NOTE
 When driving conditions are not suitable to
use the LDW, turn off the LDW.
WARNING System problem warning
Sensor is too hot or cold
BK0249100US.book 136 ページ ２０１７年５月１０日 水曜日 午前８時４９分