Mitsubishi MOTORS Lancer Evolution IX 2005, Дополнение к руководству по ремонту

Страница: 19 / 106

TYRES AND WHEELS – GENERAL, ON-VEHICLE SERVICING 31-1
SECTION 31
WHEELS AND TYRES
CONTENTS
General........................................................1
On-vehicle servicing..................................1
Removal of emergency puncture repairing agent....1
Disposal of emergency puncture repairing agent ....2
General
The following servicing guidelines have been prepared now that vehicles are supplied with an emergency puncture repair kit.
On-vehicle servicing
Removal of emergency puncture repairing
agent
When repairing or replacing a tyre which has been treated using the
puncture repair kit, remove the emergency puncture repairing agent
(henceforth, repairing agent) from the tyre, in accordance with the
guidelines below.
Note
When removing the repairing agent, a container (the empty bottle
which contained the repairing agent), and the insertion hose and the
extraction hose from the emergency puncture repair kit, are needed.
Caution
1. Carry out the operation in a well-ventilated, airy place.
2. Take appropriate measures in order to prevent repairing
agent; getting onto the skin, being inhaled, coming into
contact with clothing, or getting into the eyes.
3. After the job has been completed, wash hands and face
thoroughly.
1. Remove the wheel from the vehicle, and remove the air from the
tyre.
2. Cut away the rubber part of the valve using a cutter-knife.
3. Attach the injection hose to the empty repairing agent bottle, and
then attach the extraction hose onto the injection hose.
empty bottle of
repairing agent
injection
hose
extraction
hose
valve