Mitsubishi MOTORS LANCER EVOLUTION 2014, Руководство пользователя

Страница: 112 / 338

Ignition switch
Features and controls 5-51
5
The engine is off and the steering wheel is
locked. The key can be inserted and removed
only when the switch is in this position.
Allows operation of electrical accessories
with the engine off.
The engine runs and all accessories can be
used.
Engages the starter. After the engine starts,
release the key and it will return automati-
cally to the “ON” position.
N00539601101
After about 30 minutes has elapsed with the
ignition switch in the “ACC” position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from
“ACC” to the “ON” position, the power is
supplied again to those devices.
N00550900139
For vehicles with a manual transaxle, when
removing the key, push the key in at the
“ACC” position and keep it depressed until it
is turned to the “LOCK” position, and
remove.
For vehicles with a Twin Clutch SST, when
removing the key, first set the gearshift lever
to the “P” (PARK) position, and then turn the
key to the “LOCK” position and remove it.
LOCK
ACC
ON
Manual transaxle
Twin Clutch SST
START
NOTE
 Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered to the immobi-
lizer computer.
(Refer to “Electronic immobilizer” on page
5-4.)
ACC power auto-cutout func-
tion
NOTE
 It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to about 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, consult a Mitsubishi Motors
dealer.
To remove the key
NOTE
Manual transaxle
BK0200800US.book 51 ページ ２０１３年２月１４日 木曜日 午後２時２８分