Mitsubishi MOTORS LANCER EVOLUTION 2014 Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 338

Mitsubishi MOTORS LANCER EVOLUTION 2014 Скачать руководство пользователя страница 132

S-AWC (Super-All Wheel Control)

Features and controls

5-71

5

N00541300036

S-AWC is an integrated vehicle dynamics
control system that helps enhance driving
performance, cornering performance, and
vehicle stability over a wide range of driving
conditions through integrated management of
the ACD, the AYC, the anti-lock braking sys-
tem, and the active stability control (ASC).

Please read this section in conjunction with
the following sections.
ACD (Active center differential system)



P.5-71
AYC (Active yaw control system)



P.5-72

Anti-lock braking system



P.5-74

Active stability control (ASC)



P.5-76

N00541400011

The ACD is a system that improves accelera-
tion performance and straight-ahead stability
by regulating the differential limiting action

CAUTION



Always use tires of the same size, same type,
and same brand, and which have no wear dif-
ferences. Using tires that differ in size, type,
brands or the degree of wear, will increase
the differential oil temperature, resulting in
possible damage to the driving system. Fur-
ther, the drive train will be subjected to
excessive loading, possibly leading to oil
leakage, component seizure, or other serious
problems.

Towing

CAUTION



Do not tow all-wheel drive vehicles with the
front or rear wheels on the ground (Type A
or Type B) as illustrated. This could result in
damage to the drivetrain, or unstable towing.
If you tow all-wheel drive vehicles, use Type
C or Type D equipment.

Jacking up all-wheel drive vehi-
cles

WARNING



Do not start or run the engine while the
vehicle is on the jack.
The jack could slip out of position and
result in an accident.

S-AWC (Super-All Wheel
Control)

CAUTION



Do not over-rely on the S-AWC. Even the S-
AWC cannot prevent the natural laws of
physics from acting on the vehicle. This sys-
tem, like any other system, has limits and
cannot help you to maintain traction and con-
trol of the vehicle in all circumstances. Reck-
less driving can lead to accidents. It is the
driver’s responsibility to drive carefully.
This means taking into account the traffic,
road and environmental conditions.



Be sure to use tires that are the same speci-
fied size, type, and brand, and have no differ-
ence in the amount of wear for all four
wheels. Otherwise, the S-AWC may not
work properly.

ACD (Active center differential
system)

BK0200800US.book 71 ページ２０１３年２月１４日　木曜日　午後２時２８分

«
...
130
131
132
133
134
...
»

Содержание LANCER EVOLUTION 2014



















































































































































































































































































































































Отзывы:

Нет отзывов