manualshive.com logo in svg

Mitsubishi MOTORS LANCER EVOLUTION 2014, Руководство пользователя, Страница: 133 / 338

Поделиться
Скачать
Mitsubishi MOTORS LANCER EVOLUTION 2014 Скачать руководство пользователя страница 133

S-AWC (Super-All Wheel Control)

5-72

Features and controls

5

and power drive distribution of the center dif-
ferential.

N00541500012

The AYC is a system, with a left-right differ-
ential limiting function and yaw control func-
tion, that enhances cornering performance
and stability during cornering by controlling
the left-right drive power difference of the
rear wheels, the braking force of all four
wheels, and the vehicle yaw moment. 

The left-right differential limiting function is
a function that enhances driving performance
and vehicle stability by preventing idle spin-
ning of a wheel when driving on slippery
road surfaces or when the road surfaces of the
left and right wheels are different.

The yaw control function is a function that
enhances vehicle cornering performance by
controlling the drive power difference of the
left and right wheels and the braking force
when the vehicle does not turn in response to
steering input, such as when the steering
wheel is turned quickly or when driving on
slippery road surfaces.

N00542401057

Select the control mode from the following
three types to suit the driving conditions.

When the ignition switch is set to the “ON”
position, operate the AWC switch to change
the control mode.
Each time the switch is pushed, the control
mode changes in the order “TARMAC” 

“GRAVEL” 

 “SNOW” 

 “TARMAC”.

NOTE

If the parking brake lever is pulled up while
the vehicle is moving, the center differential
is designed to switch to a free state condition
which will allow the rear wheel to lock eas-
ier.

AYC (Active yaw control sys-
tem) 

CAUTION

Control of the braking force does not
enhance the stopping performance of the
vehicle, therefore, pay careful attention to
the safety of your surroundings when driv-
ing.

Left-right differential limiting 
function 

Yaw control function 

S-AWC control mode 

S-AWC 

control 

mode

Operation

TARMAC

Normally, use this control
mode. Use this mode for paved
roads.

GRAVEL

Use this control mode when
driving on somewhat slippery
road surfaces, such as wet road
surfaces and gravel roads.

SNOW

Use this control mode when
driving on slippery road sur-
faces, such as snow-covered
roads.

S-AWC control mode switch 

BK0200800US.book  72 ページ  ２０１３年２月１４日　木曜日　午後２時２８分

Содержание LANCER EVOLUTION 2014



















































































































































































































































































































































Отзывы:

Нет отзывов