Mitsubishi MOTORS 2018 MIRAGE, Руководство пользователя

Страница: 264 / 354

The coolant level in this tank should be kept
between the “L” (LOW) and “F” (FULL)
marks when measured while the engine is
cold.
FULL
LOW
To add coolant
The cooling system is a closed system and
normally the loss of coolant should be very
slight. A noticeable drop in the coolant level
could indicate leakage. If this occurs, we rec-
ommend you to have the system checked as
soon as possible.
If the level should drop below the “L”
(LOW) level on the reservoir, open the lid
and add coolant.
Also, if the reservoir is completely empty, re-
move the radiator cap (B) and add coolant
until the level reaches the filler neck.
WARNING
l Do not open the radiator cap while the en-
gine is hot. The coolant system is under
pressure and any hot coolant escaping
could cause severe burns.
Anti-freeze
The engine coolant contains an ethylene gly-
col anti-corrosion agent. Some parts of the
engine are cast aluminium alloy, and periodic
changing of the engine coolant is necessary
to prevent corrosion of these parts.
Use “MITSUBISHI MOTORS GENUINE
SUPER LONG LIFE COOLANT PREMI-
UM” or equivalent*.
*: similar high quality ethylene glycol based
non-silicate, non-amine, non-nitrate and non-
borate coolant with long life hybrid organic
acid technology
MITSUBISHI MOTORS GENUINE Coolant
has excellent protection against corrosion and
rust formation of all metals including alumi-
nium and can avoid blockages in the radiator,
heater, cylinder head, engine block, etc.
Because of the necessity of this anti-corro-
sion agent, the coolant must not be replaced
with plain water even in summer. The re-
quired concentration of anti-freeze differs de-
pending on the expected ambient tempera-
ture.
Above -35 °C: 50 % concentration of anti-
freeze
Below -35 °C: 60 % concentration of anti-
freeze
CAUTION
l Do not use alcohol or methanol anti-freeze
or any engine coolants mixed with alcohol
or methanol anti-freeze. The use of an im-
proper anti-freeze can cause corrosion of the
aluminium components.
l Do not use water to adjust the concentration
of coolant.
l Concentrations exceeding 60 % will result in
a reduction of both the anti-freeze and cool-
ing performance thus adversely affecting the
engine.
l Do not top up with water only.
During cold weather
The concentration should be checked before
the start of cold weather and anti-freeze add-
ed to the system if necessary to prevent dam-
age to engine and radiator due to freezing.
Engine coolant
10-06
OA0X19E2
Maintenance
10