Mitsubishi MOTORS 2018 MIRAGE, Руководство пользователя, Страница: 271 / 354

CAUTION
l
An aluminium wheel can be damaged by a
snow traction device (tyre chains) while
driving. When fitting a snow traction device
(tyre chains) on an aluminium wheel, take
care that any part of the snow traction device
(tyre chains) and fitting cannot be brought
into contact with the wheel.
l Remove the wheel covers before installing a
snow traction device (tyre chains), otherwise
they may be damaged by the snow traction
device (tyre chains). (See page 8-18.)
l When installing or removing a snow traction
device (tyre chains), take care that hands and
other parts of your body are not injured by
the sharp edges of the vehicle body.
NOTE
l The laws and regulations concerning the use
of snow traction device (tyre chains) vary.
Always follow local laws and regulations.
In most countries, it is prohibited by the law
to use a snow traction device (tyre chains)
on roads without snow.
Wiper blade rubber
replacement
Windscreen wiper blades
(Driver’s side)
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A)
disengages from the hook (B). Then,
pull the wiper blade further to remove it.
NOTE
l
Do not allow the wiper arm to fall onto the
windscreen; it could damage the glass.
3. Attach the retainers (C) to a new wiper
blade.
Refer to the illustration to ensure that the
retainers are correctly aligned as you at-
tach them.
4. Insert the wiper blade into the arm, start-
ing with the opposite end of the blade
from the stopper. Make sure the hook
(B) is fitted correctly in the grooves in
the blade.
NOTE
l
If retainers are not supplied with the new
wiper blade, use the retainers from the old
blade.
Wiper blade rubber replacement
10-13
OA0X19E2
Maintenance
10