Mitsubishi Electric VS-60HS12U, Руководство по установке

Страница: 52 / 64

52
VS-60HS12U Set-up Manual
M
en
u t
rees
SCREEN INDICATION LED WARNING OFF, ON (OFF)
Mark indication switch / setting
when 2 chips or more for each color
break down
35
STANDBY LED OFF, ON (ON)
Lighting switch / setting during
stanby state
35
ERROR LED OFF, ON (ON)
Blinking to indicate error switch /
setting
35
BLOWOUT LED OFF, ON (ON)
Blinking at light source failure switch
/ setting
35
AUTO POWER ON OFF, ON (OFF)
Auto-power on by main power
switch
35
BLOWOUT OPERATE, SHUTDOWN (OPERATE) Action at light source blowout 35
MUTE COLOR BLACK, BLUE (BLACK)
Background color setting in no signal
35
GAMMA 1 – 5 (1) Gamma curve correction 35
DITHER OFF, ON (ON) Dithering 35
* Emergency Setting OFF, ON (OFF)
Color setting at LED light failure
(* only in the Wallaby menus)
25
MISC. 2
IMAGE FLIP N/E, N/W, S/E, S/W (S/W) Image flip setting 25
AUTO SCAN
--, DVI DIGITAL
,
DVI ANALOG,
OFF, ON (OFF) Input signal scan setting 35
FRAME LOCK OFF, WINDOW 1 (OFF) External signal sync setting 35
SYSTEM SYNC. 50Hz, 60Hz (60Hz) Sync. Frequency setting on monitor 25
BAUD RATE 9600bps, 19200bps (19200bps) RS-232 transmission speed setting 35
MEMORY INITIALIZE Factory default restoring 49
SYSTEM SETTING SAVE YES, NO (YES) System memory save 25
Input memory
Menu Range (default) Description Page
INPUT MEMORY
WINDOW
ARRANGEMENT
RESET, TILE, DOT BY DOT (TILE) Window auto-arrangement 37
MEMORY SCAN Input signal auto-scan 38
H. POSITION 0 – 1920
Horizontal signal position adjustment
39
V. POSITION 0 – 1200 Vertical signal position adjustment
H. SIZE 640 – 1920 Horizontal size adjustment 39
V. SIZE 200 – 1200 Vertical size adjustment
CLOCK PHASE -64 – 63 Analog Sampling clock phase adjustment 38
H. TOTAL 700 – 2640 Analog
Horizontal sampling number
adjustment
39
CONTRAST 0 – 150 (100) Contrast setting 39
BRIGHTNESS -50 – 50 (0) Brightness setting 39
AMP. GAIN AUTO ADJUSTMENT
Analog Analog input gain correction 38
R-, G-, B-GAIN 0 – 2047
DETAIL ASPECT RATIO AUTO, 4:3, 5:4, 16:9 (AUTO) Input signal aspect ratio setting 40
SIGNAL TYPE RGB, YPbPr, YCbCr (RGB) Signal format setting 40
INTERLACE OFF, STATIC, ADAPTIVE (OFF) Interlace signal conditioning 40
FIELD JUDGEMENT NORMAL, REVERSE (NORMAL) Interlace signal field swap judgment 40
SCALING FILTER OFF, 1, 2 (1) Scaling filter setting 40
CLAMP START 1 – 255 (8) Analog Clamp start position setting 40
CLAMP WIDTH 1 – 30 (16) Analog Clamp width setting
MASK START -32 – 0 (0) Analog V. sync mask start position setting 40
MASK END 0 – 31 (0)
Analog
V. sync mask end position setting
FRAME LOCK OFF, ON (OFF) External signal sync setting 40
FILM MODE AUTO, OFF (AUTO) Film mode setting 40
INPUT MEMORY
SAVE
SELECT MEMORY
NUMBER
INP.001 – INP.128 (INP.001) Input memory save 41