Mitsubishi Electric VS-60HS12U, Руководство по установке

Страница: 41 / 64

REV 1.0
41
In
pu
t me
mo
ry
s
ett
in
g
3.6.3 Input memory saving
INPUT MEMORY > INPUT MEMORY SAVE
The adjusted values can be saved in an input memory. There are 128 memories available.
A change in an input memory shows INPUT SETTING SAVE menu, when going back to the TOP menu by [ESC]
button.
Select YES and designate a memory number to save in. The current setting will be saved in the memory. When the
number has already been registered, an overwrite confirmation message will be displayed.
In Wallaby, when you finish the adjustment, surely click “Save” button to store the setting in each monitor.
The “Save” button shows the “Save Input Memory” window. The input signal type is displayed in the comment field.
This commend can be replaced with up to 16 letters. Specify the input memory number to save the setting in, and
click “Save”.
3.6.4 Input memory calling / deleting
Registered input memories can be called or deleted when needed.
[MEM LIST] button on the remote control shows MEMORY CALL menu. Or
select MEMORY CALL in TOP menu.
n
Call: Bring the target window on top and select INPUT MEMORY >
MEMORY CALL. Designate a memory number to be called.
In Wallaby, select the window to display the image and double-click the
input memory to be called in the input memory list.
n
Delete: Select INPUT MEMORY > MEMORY DELETE and designate a
memory number to be deleted. ”DELETE OK?” > YES deletes the memory.
In Wallaby, right-click the input memory in the input memory list and
click “Delete”.
In Wallaby, the following right-click menus change the display method in
the memory list. “Refresh” menu refreshes the list.
Details Icons List Small Icons