Mitsubishi Electric PURY-100TMU, Руководство по обслуживанию

Страница: 75 / 121

–74–
Note 1 :
• Board connector CN10 corresponds to TH11 through TH14, while connector
CN11 corresponds to TH15 through TS15. Remove the applicable connector
and check the sensor for each number.
Note 2, 3 :
1. Pull the sensor connector from the I/O board. Do not pull on the lead wire.
2. Measure resistance using a tester or other instrument.
3. Compare measured values with values on the graph below. A value within a range of
±
10% is normal.
Resistance measurement point (connector)
Temperature sensor resistance (graph)
Note 4 :
• Check using LED monitor display switch (outdoor MAIN board SW1)
Measured Data Signal SW1 Setting Remarks
Liquid inlet
temperature
TH11 See converter.
Bypass outlet
temperature
TH12 See converter.
Bypass outlet
temperature
TH15 See converter.
Bypass inlet
temperature
TH16 See converter.
Touch the probes of the tester or other instrument
to the shaded areas to measure.
Resistance value
(k
Ω)
Temperature ˚C (˚F)
1
ON
2 3 4 5 6 7 8 9 10
1
ON
2 3 4 5 6 7 8 9 10
1
ON
2 3 4 5 6 7 8 9 10
1
ON
2 3 4 5 6 7 8 9 10
Thermistor R
o
=15 k
Ω
Rt=15exp 3460 ( – )
1
273+tc
1
273+o
∗
When SW4-5 is turned OFF, "˚F" is indicated, while when SW4-5 is
turned ON, "˚C" is indicated.
Note : For more easier readings of temperature
scale convert to ˚C.
˚F = ˚C + 32
9
5