17
Screen image when the Fahrenheit unit is selected
Request
z
In selecting the output source, set the function usable practically. For example, please
refrain from setting to [AUTO mode] to the indoor group without the [AUTO mode]
function.
z
The operating temperature can be set to a temperature between 12ºC and 28ºC on the
indoor units whose operation mode is set to Heating in the “Setting relating to
input/output” menu. Do not make this setting on the units that are not designed to
operate in the heating temperature range of between 12ºC and 18ºC.
Notice
z
For setting of the detail of output source, all functions are displayed as the candidates.
Select the function being provided to the actual equipment.
z
The candidates of input and output sources unused will be deleted at completion of the
setting of the table file. Setting with the candidates of the input or output source is
required again.
z
Settings for the output content can be copied and pasted with Ctrl+C and Ctrl+V key
combinations.
z
Settings for the output content can be deleted by row with Ctrl+X (or Sfhit+Delete) key
combinations.
Notice
z
When the setting temperature shown below is selected, use G-50A, PAC-YG21CDA,
indoor units, or remote controllers that have 1ºF temperature setting function.
54 56 58 60 62 64 66 70 72 74 76 78 80 82 ºF
[Applicable version] G-50A
: Ver.3.00 or later
PAC-YG21CDA
: Ver.2.20 or later
Indoor
unit
/Remote
controller
: Models with 1ºF temperature setting function
