Mitsubishi Electric Mr.Slim PKA-M-LA Series, Руководство по эксплуатации

Страница: 13 / 22

12
6. Care and Cleaning
■
Filter information
will appear on the Main display
in the Full mode when it is time to
clean the filters.
Wash, clean, or replace the filters
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select “Maintenance” from the Main
menu, and press the [SELECT] but-
ton.
Press the [F4] button to reset filter
sign.
Refer to the indoor unit Instructions
Manual for how to clean the filter.
Select “OK” with the [F4] button.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu
....................... [MENU] button
• To return to the previous screen
....................... [RETURN] button
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
F1 F2 F3 F4
Main menu:
Filter information
Reset
Press Reset button after
filter cleaning.
F1 F2 F3 F4
Filter information
Filter information
OK
Cancel
Reset filter sign?
Filter sign reset
Main menu:
F1 F2 F3 F4
Select “Filter information” from the
Maintenance menu, and press the
[SELECT] button.
Cursor
Maintenance menu
Error information
Filter information
Cleaning
F1 F2 F3 F4
Main menu:
Main Main menu
Maintenance
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and
the filter sign cannot be reset.
If two or more indoor units are connected, filter cleaning timing for each
unit may be different, depending on the filter type.
The icon
will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon is scheduled to appear after a certain duration of operation,
based on the premise that the indoor units are installed in a space with
ordinary air quality. Depending on the air quality, the filter may require
more frequent cleaning.
The cumulative time at which filter needs cleaning depends on the model.
• This indication is not available for wireless remote controller.
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
Caution:
• Ask authorized people to clean the filter.
■
Cleaning the filters
• Clean the filters using a vacuum cleaner. If you do not have a vacuum
cleaner, tap the filters against a solid object to knock off dirt and dust.
• If the filters are especially dirty, wash them in lukewarm water. Take care
to rinse off any detergent thoroughly and allow the filters to dry completely
before putting them back into the unit.
A
B
1
Pull both the bottom corners of the grille to open the grille, then lift
the filter.
A Filter
B
Grille
Caution:
• Do not dry the filters in direct sunlight or by using a heat source,
such as an electric heater: this may warp them.
• Do not wash the filters in hot water (above 50°C), as this may
warp them.
• Make sure that the air filters are always installed. Operating the
unit without air filters can cause malfunction.
Caution:
• Before you start cleaning, stop operation and turn OFF the power
supply.
• Indoor units are equipped with filters to remove the dust of sucked-
in air. Clean the filters using the methods shown in the sketches
above.
en
RH79A070W01_01en.indd 12 2020/09/08 11:28:43