9
<Vane setting>
<Vent. setting>
<Returning to the Main menu>
3. Operation
Note:
●
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
●
Available directions depend on the type of unit connected.
●
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in “Standby” or “Defrost” states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem-
perature setting.
<[Manual] To Change the Airflow’s Left/Right Direction>
* The louver button cannot be used.
• Stop the unit operation, hold the lever of the louver, and adjust to the
desired direction.
* Do not set to the inside direction when the unit is in the cooling or dry-
ing mode because there is a risk of condensation and water dripping.
Caution:
To prevent falls, maintain a stable footing when operating the unit.
3.6. Ventilation
For LOSSNAY combination
■
The following 2 patterns of operation is available.
•
Run the ventilator together with indoor unit.
•
Run the ventilator independently.
Note: (for wireless remote controller)
●
Running the ventilator independently is not available.
●
No indication on the remote controller.
Press the [F1] or [F2] button.
Press the button as indicated above
to go through the following setting
options.
Auto
Auto
Step 1
Step 2
Step 3
Step 4
Step 5
Swing
Swing
Select “Swing” to move the vanes
up and down automatically.
When set to “Step 1” through
“Step 5”
, the vane will be fixed at
the selected angle.
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
Select “Vane·Louver·Vent.
(Lossnay)” from the Operation
menu, and press the [SELECT]
button.
Select “Operation” from the Main
menu (refer to 3.5.1), and press the
[SELECT] button.
Operation
Main
Main menu
F1
F2
F3
F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1
F2
F3
F4
Press the [RETURN] button to go
back to the Main menu.
Press the [F4] button to go through
the ventilation setting options in the
order of “Off ”, “Low ”, and “High”.
* Settable only when LOSSNAY unit
is connected.
Off
Low
High
Off
Low
High
• The fan on some models of indoor
units may be interlocked with cer-
tain models of ventilation units.
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1
F2
F3
F4
Fri
Off
Vent.
Vane
F1
F2
F3
F4
Fri
Low
F1
F2
F3
F4
Vent.
Vane
en
RH79A070W01_01en.indd 9
2020/09/08 11:28:41
