83
The following settings and monitoring can be made on AI Controllers (PAC-YG63MCA).
When G(B)-50A or TG-2000A is connected, the setting must be made on G(B)-50A Web Browser or
TG-2000A.
(a) Settings
*Current time
*Measurement category (temperature, humidity)
*Measurement range (upper limit, lower limit, correction value)
*Out-of limit alarm value (alarm threshold, alarm-off threshold)
(b) Monitoring
*Current measurement value
*Current out-of-limit alarm status
*Correction value for Pt100 detection
*Dip switch setting
*Measurement value history
*History of out-of-limit alarm/alarm-off
*Change history of measurement category (temperature or humidity)
3.13.2.1 Monitoring measurement value on AI Controllers (63MC)
(1) Click
[Option]
in the menu bar and
select
[DIDO/AI/PI] -> [AI/PI setting]
in
the sub-menu.
(2) Click of the unit (AI Controller)
to be set or monitored on the
Main screen
.
(3) The current measurement value is monitored, and
AI controller (63MC) measurement value
monitoring screen
will appear.
[Measurement value]
The current measurement value of
each channel is shown.
[Alarm status]
The current out-of-limit alarm status is shown.
[Upper detection] [Upper cancellation]
[Lower detection] [Lower cancellation]
The preset alarm detection value and
alarm cancellation value are shown.
(4) Click
[Monitor update]
to update the monitoring status.
(5) Click
[File output]
to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.7.]
NOTE:
The temperature is displayed in the unit (°C or °F) that has been selected at Maintenance Tools startup.
