30
3.3 Address Search Method
3.3.1 Address Search Method Selection
(1) Start the M-NET Maintenance Tools and the
Select The Address Searching Method Screen
will
appear after the
Title Screen
.
(2) Click on either or to select the
address search method.
*
Automatic Search
The Maintenance Tools automatically searches for
and displays information about units connected to
the M-Net transmission line.
*
Manual Search
The user optionally searches for the units connect to the
M-Net transmission line.
3.3.2 Automatic Searching
(1) Click on and the
Automatic Address
Searching Screen
will appear.
- The time required to complete the automatic search
will depend on the PC.
- The address currently being searched for is
displayed as [
Address
]. Up to 250 addresses can
be searched for.
- Click on to end automatic search.
The
Main Screen
will appear.
(2) When automatic search has ended, the
Main
Screen
will appear.
Returning to the
Main Screen
enables the [
Function Buttons
].
3.3.3 Manual Searching
(1) Click on and the
Main Screen
will appear.
(2) Click on the [
Button
] of the address desired and
searching will begin.
NOTE:
When a system is changed, please search an address after re-starting a Maintenance tool and G-50A.
