4 FUNCTIONS
4.1 Function List
27
4
4
FUNCTIONS
This chapter explains the functions and setting methods for tools, which can be used for a vision sensor VS70.
For details, refer to the help of In-Sight Explorer.
4.1
Function List
The main functions of In-Sight Explorer are listed below.
Function name
Description
Application Steps
The settings, which are necessary to use a vision sensor, are displayed in the order so that the settings can be
made easily.
1. Start
To select a vision sensor to set.
An image to set determination conditions can be specified as well.
Get Connected
To select a vision sensor to set, and establish a connection.
Set Up Image
To specify an image to be used for setting determination conditions. The image is specified by importing an
image reflected to a vision sensor, or specifying an image file saved in a personal computer.
2. Set Up Tools
To set conditions to determine the image captured with a vision sensor.
Locate Part
To make settings to determine whether there is a location that matches the set feature.
Location Tools
To set a feature.
Inspect Part
To make settings to determine whether the feature that has been set is satisfied.
The shape and quantity of products can be inspected.
Presence/Absence
Tools
To make settings for judging the presence/absence of features.
Measurement Tools
To make settings for measuring the distance, diameter, angle, and dimension of a feature.
Counting Tools
To make settings for counting features.
Identification Tools
To make settings for identifying and verifying a feature and color.
Geometry Tools
To make settings for creating a geometrical figure.
Math & Logic Tools
To make settings for calculation processing or processing based on a logic by combining results set with
multiple tools.
Plot Tools
To make settings for creating a conditionally enabled graphics that can be placed onto an image.
Image Filter Tools
To make settings for enhances an image or region of an image for image analysis.
Defect Detection Tools
To make settings for detecting a defect in an inspection target.
Calibration Tools
To make settings for creating a calibration that can be shared among jobs.
3. Configure Results
To set an output method for the determination results of the images that were acquired.
Inputs/Outputs
To set input and output data.
Communication
To make settings for communication between a vision sensor and an external device such as a programmable
controller according to the specified method.
4. Finish
To save settings and check operations.
Filmstrip
To check the images saved in the vision sensor and the results of capture, or check the images saved in the
personal computer.
Save Job
To save settings to a vision sensor.
Run Job
To operate a vision sensor based on the settings made in prior steps. The operation can also be checked.
iQ Sensor Solution functions
The functions of iQ Sensor Solution can be performed using an engineering tool.
For details on the iQ Sensor Solution functions, refer to the following manual.
iQ Sensor Solution Reference Manual
Automatic detection of connected
devices
To detect connected vision sensors.
Linkage with dedicated tools
(association with properties)
To make In-Sight Explorer to start from an engineering tool.
Spreadsheet
To perform programming using spreadsheet in In-Sight Explorer. Spreadsheet is suitable for creating a
complex vision application because spreadsheet has higher flexibility in setting than EasyBuilder.
Содержание MELSENSOR VS70 Series
