Mitsubishi Electric LC62 CHASSIS XL6500LU, Руководство по обслуживанию

Страница: 45 / 135

- 27 -
ax2
bx2
dx1
RF
RD
RH
cx3
ex3
SW shield
Power box T unit
POWER PCB ASSY
Power shield L
16. Removal of the POWER PCB
ASSY
1. Remove the terminal cover ASSY according to “1.
Removal of the terminal cover ASSY”.
2. Remove the front case unit and top cover unit ac-
cording to “3. Removal of the lens unit and zoom fo-
cus motor”.
3. Remove the top case unit according to “4. Removal
of the top case unit and KEY PCB ASSY”.
4. Remove the terminal board unit according to “8. Re-
moval of the speaker”.
5. Remove the main barrier according to “9. Removal of
the power fan”.
6. Remove the terminal ASSY according to “11. Remov-
al of the TERMINAL PCB ASSY”.
7. Remove the DRIVE PCB ASSY according to “12. Re-
moval of the DRIVE PCB ASSY and LCD block ”.
8. Remove the drive PCB holder according to “13. Re-
moval of the drive fan”.
9. Disconnect the thermostat connector according to “15.
Removal of the optical unit”.
10. Remove the two screws (a) and two screws (b) as
shown in Fig. 3-12.
11. Remove the power shield L and SW shield as shown
in Fig. 3-12.
12. Release the three hook (c) as shown in Fig. 3-12.
13. Lift the power box T unit and disconnect the connec-
tor (RD, RF and RH) as shown in Fig. 3-12.
14. Remove the power box T unit as shown in Fig. 3-12.
15. Remove the screw (d) as shown in Fig.3-12.
16. Release the three hook (e) as shown in Fig. 3-12.
17. Remove the POWER PCB ASSY as shown in Fig.
3-12.
Fig. 3-12