Mitsubishi Electric Got 1000, Руководство пользователя

Страница: 50 / 310

6 - 2
6. INSTALLATION
6.2 Panel Cutting Dimension
6.2 Panel Cutting Dimension
Make holes in the panel according to the dimensions list below.
Also, ensure 10mm of space in upper and lower parts of the panel for mounting fixtures.
• Horizontal format (If the vertical format is selected, the dimension must be rotated 90 degrees.)
6.3 Mounting Position
When mounting the GOT, the following clearances must be maintained from other structures and devices.
• The below diagram represents a horizontal installation. (The same clearances must be maintained when rotating the
GOT 90 degrees clockwise for a vertical installation.)
*1 Vertical Format....50 mm (1.97") or more
*2 Vertical Format....80 mm (3.14") or more
Installation Environment A, D B C E
In the presence of radiated-noise or heat-generating equipment nearby 50mm or more
80mm or more
*1
50mm or more
*2
100mm or more
In the absence of radiated-noise or heat-generating equipment nearby 20mm or more 20mm or more 20mm or more 20mm or more
153 (6.03" )
+2
-0 +0.08"
-0
(4.77" )
+0.08
"
-0
10 (0.4")
or more
10 (0.4")
or more
Unit: mm (inch)
Within 2 (0.08”) to 4 (0.16”)
121
+2 -0
B
A
C D
E
Panel thickness: 2 to 4mm
(0.08 to 0.16inch)