manualshive.com logo in svg

Mitsubishi Electric FX5-DP-M, Руководство пользователя

Промышленный программируемый логический контроллер Mitsubishi Electric FX5-DP-M. Посетите наш веб-сайт, чтобы бесплатно скачать руководство пользователя на русском языке. Получите доступ к подробной информации о настройке и эксплуатации этого продукта. Скачайте руководство с manualshive.com.

Поделиться
Скачать
background image

122

10  TROUBLESHOOTING
10.5  List of Status Codes

E576H

No alarm is available for the ACK 
request.

Check the alarm occurrence status of the specified DP-Slave and retry.

E580H

No alarm is available for the ACK 
request.

Check the alarm occurrence status of the specified DP-Slave and retry.

E581H

The alarm specified in the ACK 
request is not present.

Check the alarm occurrence status of the specified DP-Slave and retry.

E582H

The alarm function is deactivated 
for the specified DP-Slave. 
Therefore no alarm is available for 
the ACK request.

Check whether the DP-Slave supports the alarm and retry.

E590H to E59AH

A hardware failure has been 
detected.

Please consult your local Mitsubishi representative.

E59BH

The Acyclic communication 
function is being executed for the 
same DP-Slave.

Check that execution of the Acyclic communication function is completed and retry.

E59CH

No resource is available.

Check that execution of the Acyclic communication function is completed and retry.

E59DH

Invalid parameter setting

Check the parameters and retry.

E59EH

The DP-Slave cannot respond.

Check the wiring of PROFIBUS cables and the start completed status of the DP-Slave, and 
retry.
When the Acyclic communication function is executed successively to the same DP-Slave, 
adjust the execution interval and retry.
For the start completed status of DP-Slaves and the intervals of executing the Acyclic 
communication function, refer to the following.
Manual for each DP-Slave

E59FH

No response was received from 
the DP-Slave.

Check the status of the DP-Slave and retry.

E5A0H

The same DP-Master is executing 
the following functions to the 
same DP-Slave.

• Acyclic communication function
• Alarm acquisition function

Check that the processing of the following functions are completed and retry.

• Acyclic communication function
• Alarm acquisition function

E5A2H

A hardware failure has been 
detected.

Please consult your local Mitsubishi representative.

F120H

Diagnostic information was 
detected in a DP-Slave.

Check Diagnostic information area for the diagnostic information detected in the DP-Slave 
and take action against the problem.

F121H

A DP-Master or DP-Slave on the 
same line has the same FDL 
address.

Check the FDL addresses for the DP-Master and DP-Slave and then configure them with the 
different FDL addresses.

F122H

An error was detected on the line.
Or the master parameters are 
inappropriate.

Check wiring of bus terminators and PROFIBUS cables.
When the bus terminators and PROFIBUS cables are wired correctly, increase setting value 
"Min. slave interval" of the master parameters.

F123H

An error was detected on the line.
Or the master parameters are 
inappropriate.

Check wiring of bus terminators and PROFIBUS cables.
When the bus terminators and PROFIBUS cables are wired correctly, increase setting value 
"Min. slave interval" of the master parameters.

F124H

An error was detected on the line.
Or the master parameters are 
inappropriate.

Check wiring of bus terminators and PROFIBUS cables.
When the bus terminators and PROFIBUS cables are wired correctly, increase setting value 
"Min. slave interval" of the master parameters.

F125H

The DP-Master is in the clear 
request sent state.

Since master parameter "Error action flag" is checked, clear requests are being sent to all 
the DP-Slaves.
When clear requests do not need sending, uncheck "Error action flag".

F126H

The line status is unstable.
Or the PROFIBUS cable has 
short-circuited.

Check wiring of bus terminators and PROFIBUS cables.
Check whether the PROFIBUS cable has short-circuited.

Status code

Error details and cause

Action

Содержание FX5-DP-M

















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FX5-DP-M

Gardena 4030 Operator'S Manual preview
4030
Бренд: Gardena Страницы: 16
MADRIX STELLA Technical Manual & Quick Start Manual preview
STELLA
Бренд: MADRIX Страницы: 28
JENCO 6311 Operation Manual preview
6311
Бренд: JENCO Страницы: 36
jcm-tech WAVE500 User Manual preview
WAVE500
Бренд: jcm-tech Страницы: 8
OJ Electronics OJ-Air2-WP55 Instructions Manual preview
OJ-Air2-WP55
Бренд: OJ Electronics Страницы: 8
Dakota Digital BIM-01-2-FTCH Manual preview
BIM-01-2-FTCH
Бренд: Dakota Digital Страницы: 12
Zapf Creation Baby Born 828656 Manual preview
Baby Born 828656
Бренд: Zapf Creation Страницы: 2
Mazurczak MTR 3000 Installation And Operating Instructions Manual preview
MTR 3000
Бренд: Mazurczak Страницы: 9
Grundfos PLV Series Installation And Operating Instructions Manual preview
PLV Series
Бренд: Grundfos Страницы: 16
Loewe 70830 081 Installation Instructions Manual preview
70830 081
Бренд: Loewe Страницы: 62
Shimaden PAC18A Series Instruction Manual preview
PAC18A Series
Бренд: Shimaden Страницы: 32
EOS InfraStyle Operating Instructions Manual preview
InfraStyle
Бренд: EOS Страницы: 84
Z-Wave HKZW-STICK Operating Manual preview
HKZW-STICK
Бренд: Z-Wave Страницы: 3
Mosa EAS 15-806 Use And Maintenance Manual preview
EAS 15-806
Бренд: Mosa Страницы: 28
D+H RZN 43 Series Original Instructions preview
RZN 43 Series
Бренд: D+H Страницы: 2
GRAUPNER MC-22S Programming Manual preview
MC-22S
Бренд: GRAUPNER Страницы: 180
4baby Eko AB220 User Manual preview
Eko AB220
Бренд: 4baby Страницы: 12
Victaulic End Caps Installation Instructions preview
End Caps
Бренд: Victaulic Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды