Mitsubishi Electric FR-LU08, Инструкция по эксплуатации

Страница: 15 / 53

PRE-OPERATION INSTRUCTIONS
15
1
1.4.3 Installation of a backup battery
With a battery (CR1216), time counting of the FR-LU08(-01) continues even when the main power of the inverter is turned OFF
(real time clock function). For the details of the real time clock function, refer to
page 20 .
1
Loosen the screw on the
battery cover, which is
located on the back side
of the FR-LU08(-01).
NOTE
• Do not replace the battery of the FR-LU08(-01)
while power is ON.
• Do not use batteries that have been dropped or
otherwise received an impact. Battery leakage
may occur. Discard the batteries.
2
Insert a flathead
screwdriver to the slot,
and lift the cover to
open.
3
Place the battery as shown
in the right figure.
4
Close the battery cover, and tighten the screw.
(Tightening torque: 0.1 to 0.3 N·m)
+
-