Mitsubishi Electric FR-LU08, Инструкция по эксплуатации

Страница: 23 / 53

FUNCTION AND BASIC OPERATION
23
2
2.2 Frequency setting
The frequency applied in the PU operation mode or external/PU combined operation mode ( Pr.79 ="3") can be set.
To set the frequency, switch the monitor display from the Main monitor screen to the Frequency setting screen, turn to
input a frequency setting value, and press to confirm the setting.
To switch back the monitor display from the Frequency setting screen to the Main monitor screen, press .
NOTE
• If the external start signal (STF or STR) is ON, the External operation mode cannot be switched to the PU operation
mode.
• The screen can be switched to the Extended direct screen depending on the setting of Pr.1000 Direct setting
selection . (Refer to page 24 .)
(SET)
(BACK)
BACK SET
STOP PU
Frequency Setting
Pres value
Set value
60.00Hz
60.00Hz
PREV SET NEXT
STOP PU
Hz
Output frequency
1 2 : 3 4
0.00
Frequency setting screen One of the Main monitor screens